Commercial Water Solutions in Tampa, Florida and Surrounding Counties


 
 
EWS_EWSCommercialSofteners_2
 

EWS COMMERCIAL HEAVY DUTY WATER SOFTENER

 
All systems are available in single, duplex, triplex, and quadplex operation.

  • Dynamic Brine-Making system
  • Counter-Current Brining
  • Washed Quartz Underbedding
  • Turbine Flow Meter
  • Safe 24-Volt Electronics
  • Self-Cleaning Upper and Lower Distributors
  • High-Density Salt Storage Tank
  • Exceptional Flow Rates
 
 
 

ECI FIBERGLASS SOFTENERS WITH FLECK VALVE

With VIP 1/2/3E Control
  • Available for Single, Twin Alternating, Duplex Alternating or Parallel, Triplex Alternating or Parrallel, Quadplex Alternating or Parallel operation.
  • The VIP electronic meters are UL listed.
  • Solid state single or multiple metered demand initiated regeneration including rate of flow, re-settable totalizing meter, and self-diagnostic status monitoring. NEMA enclosed controller; delayed or immediate regeneration.
  • Lead-free brass multi-port control valves with self-cleaning, hydraulically balanced positive acting piston.
  • Timed brine refills eliminate constant line pressure on shut off float devices.
  • Standard safety-float valve shutoff on 400/700lb brine tanks; optional on 1000lb and larger sizes.
 
ECI_Fiberglass_Softener
 
  • 120V/60Hz/1pH transformer included / twist lock style electrical connections / 24V control voltage.

With Time Clock Control

  • Available for Single or Duplex Parallel operation
  • Automatic mechanical, time clock initiated regeneration. Hard water by-pass during regeneration.
  • Lead-free brass multi-port control valves with self-cleaning, hydraulically balanced positive acting piston.
  • Timed brine refills eliminate constant line pressure on shut off float devices.
  • Standard safety-float valve shutoff on 400/700lb brine tanks; optional on 1000lb and larger sizes.
  • High strength polyethylene tank liners for longer service life, FRP wrapped for strength and corrosion resistant. ANSI/NSF listed tanks.
  • 120V/60Hz/1pH operation

With NXT Control

  • Available for Single operation.
  • Standard plastic Fleck® meter with brass end connectors
  • NXT Demand Initiated Control
  • Hard water by-pass during regeneration
  • Lead-free brass valves
  • Self cleaning, hydraucally balanced positive acting piston control valves
  • Timed brine refills eliminate constant line pressure on shut off float devices
  • High strength polyethylene tank liners for longer service life, FRP wrapped for strength and corrosion resistance
  • ANSI/NSF listed tanks
  • 24V/60Hz/1pH operation
  • 120 volt power reduction transformer included
 
 
ECI_Epoxy_Steel_Softener
 

ECI EPOXY LINED STEEL SOFTENERS WITH FLECK VALVE

With VIP 1/2E Control
  • Available for Single, Twin Alternating, Duplex Alternating or Parallel, Triplex Alternating or Parallel, Quadplex Alternating or Parallel operation.
  • No hard water by-pass during regeneration
  • The VIP electronic time clock is UL listed
  • Solid state single or multiple metered demand initiated regeneration including rate of flow , re-settable totalizing meter, and self-diagnostic status monitoring. NEMA enclosed controller.
  • Lead-free brass multi-port control valves with self-cleaning, hydraulically balanced positive acting piston.
  • Timed brine refills eliminate constant line pressure on shut off float devices.
  • Standard safety-float valve shutoff on 400/700lb brine tanks. Optional on 1000lb and larger sizes.
 
  • Spray lined carbon steel tanks with epoxy coated int/ext for corrosion resistance
  • 120V/60Hz/1pH transformer included / twist lock style electrical connections / 24V control voltage.

With Time Clock

  • Available for Single and Duplex operation
  • Automatic mechanical Time Clock initiated regeneration
  • Lead-free brass multi-port control valves with self-cleaning, hydraulically balanced positive acting piston.
  • Timed brine refills eliminate constant line pressure on shut off float devices.
  • Standard safety-float valve shutoff on 400/700lb brine tanks. Optional on 1000lb and larger sizes.
  • Spray lined carbon steel tanks with epoxy coated int/ext for corrosion resistance
  • 120V/60Hz/1pH operation
 
 

ECI PLASTIC VALVE NEST FIBERGLASS SOFTENERS - 18" THRU 48"

With VIP 1/2E Control
  • Available for Single, Duplex Alternating or Parallel, Triplex Alternating or Parallel and Quadplex Alternating or Parallel operation
  • The VIP electronic metered or time clock feature is UL listed
  • Solid state single or multiple metered demand initiated regeneration including rate of flow, re-settable totalizing meter, and self-diagnostic status monitoring. NEMA enclosed controller
  • Schedule 80 PVC valve nest header design, utilizing composite diaphragm valves for corrosion resistance.
  • Timed brine refills eliminate constant line pressure on shut off float devices.
  • Standard safety-float valve shutoff on 400/700lb brine tanks. Optional 1000lb and larger sizes.
  • High strength polyethylene tank liners for longer service life, FRP wrapped for strength and corrosion resistance. ANSI/NSF listed tanks.
 
ECI_ValveNest_Fiberglass_Softener
 
  • 120V/60Hz/1pH transformer included / twist lock style electrical connections / 24V control voltage

With Time Clock Micro T Control

  • Available for Single or Duplex Parallel operation
  • Schedule 80 PVC valve nest header design, utilizing composite diaphragm valves for corrosion resistance.
  • Timed brine refills eliminate constant line pressure on shut off float devices.
  • Standard safety-float valve shutoff on 400/700lb brine tanks. Optional 1000lb and larger sizes.
  • High strength polyethylene tank liners for longer service life, FRP wrapped for strength and corrosion resistance. ANSI/NSF listed tanks.
  • 120V/60Hz/1pH transformer included / twist lock style electrical connections / 24V control voltage
 
 
ECI_ValveNest_Steel_Softener
 

ECI PLASTIC VALVE NEST EPOXY LINED SOFTENERS - 18" THRU 48"

With VIP 1/2E Control
  • Available for Single, Duplex Alternating or Parallel, Triplex Alternating or Parallel, Quadplex Alternatic or Parallel operation
  • The VIP electronic metered or time clock feature is UL listed
  • Solid state single or multiple metered demand initiated regeneration including rate of flow, re-settable totalizing meter, and self-diagnostic status monitoring. NEMA enclosed controller.
  • Schedule 80 PVC valve nest header design, utilizing composite diaphragm valves for corrosion resistance.
  • Timed brine refills eliminate constant line pressure on shut off float devices.
  • Standard safety-float valve shutoff on 400/700lb brine tanks. Optional 1000lb and larger sizes.
  • Lined carbon steel tanks with epoxy coated int/ext for corrosion resistance.
  • 120V/60Hz/1pH transformer included / twist lock style electrical connections / 24V control voltage
 
With Time Clock
  • Available for Single and Duplex operation
  • Automatic electronic time clock initiated regeneration with Micro T controller
  • Schedule 80 PVC valve nest header design, utilizing composite diaphragm valves for corrosion resistance.
  • Timed brine refills eliminate constant line pressure on shut off float devices.
  • Standard safety-float valve shutoff on 400/700lb brine tanks. Optional 1000lb and larger sizes.
  • Spray lined carbon steel tanks with epoxy coated int/ext for corrosion resistance
  • 120V/60Hz/1pH transformer included / twist lock style electrical connections / 24V control voltage
 
 

ECI HVE SERIES

  • 4” x 40” Low-Energy TFC Membranes – 98% maximum TDS rejection. Perfect for a variety of rugged feed water conditons.
  • Smooth, Quiet Operation – Stainless steel, multi-stage centrifugal pumps with plastic impellers
  • 3/4 or 2 HP 230/60 Hz/1 pH motors – Provides up to 185 PSI pressure (1”inlet) with 5 micron filter
  • Pre-plumbed, Wired and Assembled – Turn-key installation
  • Stainless Steel Membrane Housings
  • Stainless Steel Solenoid Valves
  • Heavy Duty – Powder-coated steel cabinet for durability and rust resistance.
  • Pretreatment Lockout – Disables RO production during pretreatment regeneration
  • Low Pressure Protection – to protect the pump
  • Auto Re-Start After Shutdown – to protect the pump
  • Waste Recycle – to reduce waste
  • Product and Waste Flow Meter – quickly identify and adjust recovery and product quality
  • Individually tested and preserved at the factory
 
ECI-HVE-RO
 
 
 
ECI-MVE-RO
 

ECI MVE SERIES

  • Compact Design - Wall mount or floor/shelf mount
  • Ease of Serviceability – Zero clearance required on bottom and sides. All components can be serviced from front or top of unit
  • Pretreatment Lockout – Disables RO production during pretreatment regeneration
  • Single Power Connection – For all controls, switches and solenoid valves
  • Filter In, Filter Out, Pump and Product Pressure Guages – Easy to operate and maintain
  • High Flow, Low-Pressure XLP Membrane – 98.5% maximum TDS rejection. Stands up to the most rugged of feed water conditions
  • Carbon and Sediment Filter Included – Provides basic pretreatment, dechlorination and sediment removal down to 5 microns.
  • Standard Plumbing Connection – Uses 1/2” Inlet, 3/8” permeate and drain connections
  • Stainless Steel Solenoid Valves
  • Brass Vane-Type Pump – Smooth and quiet operating (pump on 2000 GPD unit only)
  • Heavy Duty – Powder-coated steel cabinet for durability and rust resistance. Stainless steel frame available upon request
 
 
 

ECI LVE SERIES

  • Compact Design – Wall mounted
  • Pretreatment Lockout – Disables RO production during pretreatment regeneration
  • Single Power Connection – For all controls, switches and solenoid valves
  • Simple, Easy to Read Gauges – Filter In, Filter Out, and Product Pressure Gauges
  • High Flow, Low-Pressure XLP Membrane – 98.5% maximum TDS rejection. Stands up to the most rugged of feed water conditions
  • Carbon and Sediment Filter Included – Provides basic pretreatment, dechlorination and sediment removal down to 5 microns.
  • Standard Plumbing Connection – Uses 3/8" Inlet, 3/8" permeate and drain connections
  • Heavy Duty – Steel cabinet for durability and rust resistance. Stainless steel frame available upon request
 
ECI-LVE-RO
 
 
 
EWS_SafeFountainSystem
 

SAFE FOUNTAIN SYSTEM

A blend of new technology and purpose built design brings a total solution to drinking water purification. EcoWater's SFS in an economical solution that retrofits to your existing fountains and insures the highest quality water for students and staff. In addition to removing contaminants, it produces great tasting water that will encourage good hydration habits. Moreover, it provides the school district with an immediate solution that is cheaper and easier to maintain than bottled water.

Certified Contaminant Reduction:
  • NSF 53 – Certified for 99.3% lead (both colloidal and dissolved lead) and VOC removal.
  • NSF P231 – Certified for 99.9% bacteria and cysts removal.
 
Security:
  • A Point-Of-Use approach designed to remove a wide range of typical water contaminants, ensuring
    safe water regardless of municipal system upsets, water main breaks or plumbing problems.
  • Systems come equipped with an automatic shut-off that monitors flow and turns off after the rated
    number of gallons is reached.
  • EcoWater's exclusive microbiological filter is designed to provide clean healthy water, even in the
    event of a boil water alert. In fact, the system automatically shuts down under excessive bacteria
    loading.
  • Tamper proof cabinet protects the system from accidental damage and associated water leak. The
    industrial design also ensures problem-free operation for years to come.

Professional Installation and Service Options:

  • EcoWater offers professional installation and maintenance through its extensive dealer network,
    along with rental options to suit any budget.

Patented Technology:

The Safe Fountain System uses two patented technologies, MetSorb®, a unique absorber that captures lead, and FACT® particulate filters to remove fine particles and prevent system fouling.
 

ECI PORTABLE EXCHANGE DEIONIZER REGENERATION PLANTS

 
  • Separate vessel with sch. 80 PVC piping - designed for 100% expansion of anion resin
  • Clear piping for resin transfer
  • Regeneration skid with cation and anion regeneration vessels
  • Direct PLC - Koyo DL-240 with OP620 interface (2-line x 20 character LCD)
  • Semi-automatic operation - automatic regeneration after initiation
  • Monitor for water quality
  • Temperature gauge with shut down switch standard - system
  • Automatically shuts down if excessive temperature is detected
  • Separate regeneration water source for cation and anion
  • Automatic shut-down in the event of power failure
  • Air mix vessel with sch. 80 PVC piping
  • Compact, non-corrosive components
  • Vinyl ester lined steel tanks with epoxy exterior for corrosion resistance
  • Convenient, modular construction
  • Full 3" x 12" viewing windows in all vessels
  • Simultaneous regeneration of cation and anion resin
  • Brine regeneration standard (up-flow or down-flow)
  • Programmable automatic rinse to quality
  • 120 VAC power required
 
ECi-PEDI
 
 

For more information on our commercial water solutions, contact us at (813) 885-1918 in Tampa, Florida.